[nos-bbs] New to packet, running linux, looking for some advice

[Mark Phillips]

Not really. I use Polled KISS on 4 separate TNC's per G8BPQ. 

Take a look at http://www.g7ltt.com/jnos for more info.

On Tue, 2008-01-22 at 20:56 -0500, (Skip) K8RRA wrote:

> > 
> > attach asy ttyS0 - pkiss hf 1024 256 9600
> > attach kiss hf 1 6m
> > attach kiss hf 2 2m
> > attach kiss hf 3 220
> For the above to work, you better find a 4-port TNC and connect the
> RS-232 wire to the /dev/ttyS0 port
> AND the "0" interface to your HF radio tuned to a packet freq.
> AND the "1" interface to your 6m radio tuned to a packet freq.
> AND the "2" interface...
> Now this is a challenge since the KAM 9612 is the only 2-port TNC I'm
> familiar with [it works nicely for 1-1200B and 1-9600B path] but your
> 4-port example might need to be invented [say with some special
> hardware].
> 
> After all the above is done, you now have four independently functioning
> packet paths available to route traffic over on four amateur bands
> probably at more than one baud rate... BUT all known to others by your
> MYCALL.  There is more, but does that get you started?
> 
> 
> 73
> de [George (Skip) VerDuin] K8RRA k
> 
> 
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/nos-bbs
-- 



Mark Phillips, G7LTT/NI2O
Randolph, NJ