[nos-bbs] Re: AXUDP and APRS - configuring
Andre v Schayk
andre at pe1rdw.demon.nl
Sat Apr 16 20:43:57 EDT 2005
Demetre Valaris schreef:
> Hi Bill,
> This is what I use between my LINUX and Windows XP boxes in order to
> have DIGI_NED and javAPRS which run in the LINUX box talk APRS to AGW
> and UIview which run in the Windows XP box. These boxes are connected
> via Ethernet.
> I run my APRS (UIview) locally not using TCP/IP but AX25 via the AXIP
> port. This is because I want my UIview to have a longer PATH than the
> javAPRS and this cannot be accomplished by using TCP/IP connection to
> the IGATE.
> So here is my /etc/ax25ipd.conf that makes this configuration work.
> socket udp 93
> mode tnc
> device /dev/ttyqf
> speed 9600
> loglevel 2
> route sv1uy 18.104.22.168 udp 93 d
> 73 de Demetre SV1UY
Are you sure that d works? from what I remember of that ax25ipd code is
that once it finds udp in the route command it nolonger checks for d and
b resulting in only packets adressed to that call being send, I might be
wrong but in my setup I had the callfilter code hacked so the call
comparison was always valid.
73 de Andre PE1RDW
More information about the nos-bbs