[hfsig] Dead QRPi

Zoltan Doczi zoltan.doczi at gmail.com
Wed Jun 29 05:35:15 EDT 2016


Hi Dennis,

Can you share a photo of the QRPi PCB?

What type of antenna you used?
What type of Raspberry Pi used?
Do you have broadcast towers near by?


73,
HA7DCD
Zoltan

On Tue, Jun 28, 2016 at 8:18 PM, Dennis Hall <dennis at kk7x.us> wrote:

> I have been running this device for about 3 weeks and suddenly it is no
> longer working.
> I have updated my Pi and checked to ensure time is in sync.
>
> It will go into transmit fine and I can hear a tone when listening on my
> main radio.
> I am unable to tell if the signal is actually modulating as I have no
> test equipment.
>
> In looking at the QRPi there are two small bubble on top of one of the IC's
>
> Do you have any advice?
>
> 73, Dennis Hall - KK7X
>
> --
> http://rathdrumweather.us
>
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/hfsig_lists.tapr.org/attachments/20160629/775f15fa/attachment.html>


More information about the hfsig mailing list