[hfsig] RPi2B with the tapr board ...

[Craig Jungers]

https://pinout.xyz/

On Thu, Dec 1, 2016 at 1:54 PM, Orrin Winton <orrin.winton at gmail.com> wrote:

> Have been running a Pi 2B with the 20m 'hat' on wspr for months. Am
> getting about 80-90 mW out, which is fine.
>
> Am thinking of seeing what my little HF amplifier can do to boost the
> signal to a watt or two. Certainly no more than that. (At this point i
> don't know if 85mW is enough to be boosted by my external amp. I want to
> try.)
>
> The amp requires PTT keying.
>
> QUESTION:
> Does anyone know if one of the unused pins on the Pi header becomes
> grounded on transmit, to use it as a PTT?
>
> Or becomes +5V to set off a reed relay.
>
> Thanks for any comments.
>
> Orrin WN1Z.
>
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/hfsig_lists.tapr.org/attachments/20161201/78b6d326/attachment.html>