[aprssig] HF APRS igates on fldigi

Joe Della Barba joe at dellabarba.com
Wed May 13 07:34:51 EDT 2020


That is what I sent. Apparently sending by hand does not work.

Joe N3HGB


On 5/12/2020 11:46 PM, Joe Bennett wrote:
> Here is what I got. I never gated it. I'm guessing that its because it 
> was not a KISS frame???? I'm not sure what FLDigi needs to see to 
> forward it over the KISS interface. I'll have to work on setting up 
> some sort of test bed so I can test it end to end.
>
> 
> N3HGB-8>APU25N:=3859.15N/07617.12WlSVCoquina
> 
> tR tbsy n_pO e
>
>
>
> -- Joe
> KA3NAM
>
>
> May 12, 2020, 7:55 PM by joe at dellabarba.com:
>
>     That looks like me - the callsign is getting mangled. I might be
>     able to try again in about 30 minutes.
>
>     73
>
>     N3HGB
>
>     On 5/12/2020 6:57 PM, Joe Bennett wrote:
>>     I received this on 60 meters. No callsign, but the lat/lon look
>>     to be for N3HGB:
>>
>>     PU25N:=3859.15N/07617.12W
>>     lTestFlDigi1700t;gi @r
>>     j tn>APU2gC15N/07617.12WlTestFlDigi
>>     t
>>     Before RSID: <<2020-05-12T22:50Z MFSK-16 @ 5403500+1693>>
>>     isainnew¿ obp t»8>APU25N:=3859.15N/07617.12WlTestFlDig4it=
>>
>>
>>
>>     -- Joe
>>     KA3NAM
>>
>>
>>     May 12, 2020, 10:11 AM by joe at dellabarba.com
>>     <mailto:joe at dellabarba.com>:
>>
>>         I think that was me.I am going to try again today if I can. I
>>         was centered on 1700 Hz. I could see the data going out, it
>>         sends the RSID, a gap, and then the text. Maybe I need more
>>         power, I was sending at about 20 watts. :)
>>
>>         73 Joe N3HGB
>>
>>         On 5/11/2020 3:03 PM, Stephen H. Smith wrote:
>>
>>             On 5/11/2020 10:45 AM, Joe Della Barba wrote:
>>
>>                 I was sending on 60 and 30 meters earlier this
>>                 morning as N3HGB-8. Nothing showed up on APRS.FI darn
>>                 the luck!
>>
>>
>>                 Joe N3HGB
>>
>>
>>                 _______________________________________________
>>                 aprssig mailing list
>>                 aprssig at lists.tapr.org <mailto:aprssig at lists.tapr.org>
>>                 http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org
>>
>>
>>
>>             Around 09:01 EDT (1301 UTC), I copied these RSID
>>             transmissions without any following traffic.  Do these
>>             look like the times you tried?
>>
>>
>>               Before RSID: <<2020-05-11T13:01Z MFSK-16 @ 5403500+1700>>
>>
>>               Before RSID: <<2020-05-11T13:08Z MFSK-16 @ 5403500+1700>>
>>
>>               Before RSID: <<2020-05-11T13:08Z MFSK-16 @ 5403500+1700>>
>>
>>               Before RSID: <<2020-05-11T13:09Z MFSK-16 @ 5403500+1700>>
>>
>>               Before RSID: <<2020-05-11T13:13Z MFSK-16 @ 5403500+1700
>>
>>
>>
>>             What kind of transceiver were you using?
>>
>>             What exact "dial frequency were you on?
>>
>>             Were you on USB?  (Most ham transceivers try to default
>>             to LSB below 10 MHz, and must be overridden to USB.)
>>
>>             Was the center frequency of the cursor in the FLdigi
>>             waterfall exactly on 1700 Hz?
>>
>>             Did you see your transmitted string appear in the upper
>>             (buff-colored) window of FLdigi?
>>
>>             Were you trying to send from a KISS-linked APRS
>>             application, or did you just hand-enter a string directly
>>             into FLdigi?
>>
>>
>>
>>
>>             The RSID mode ID sent before the actual transmission is
>>             very reliable and will often be decoded even when the
>>             actual transmission on MFSK16, PSK63, etc fails to
>>             decode.  This could happen if the radio frequency of the
>>             radio, or the audio tones in FLdigi are off.
>>
>>             ___________________________________________________________
>>             Stephen H. Smith    wa8lmf (at) aol.com
>>             Skype:        WA8LMF
>>             EchoLink:  Node #  14400  [Think bottom of the 2-meter band]
>>             Home Page: http://wa8lmf.net
>>
>>             -----   NEW!    60-Meter APRS!   HF NVIS APRS Igate Now
>>             Operating ------
>>             <http://wa8lmf.ddns.net:14447/>
>>             <http://wa8lmf.ddns.net:14447/>
>>
>>
>>
>>             Live Off-The-Air APRS Activity Maps
>>             <http://wa8lmf.net/map> <http://wa8lmf.net/map>
>>
>>             Long-Range APRS on 30 Meters HF
>>             <http://wa8lmf.net/aprs/HF_APRS_Notes.htm>
>>             <http://wa8lmf.net/aprs/HF_APRS_Notes.htm>
>>
>>
>>
>>             You MUST be within 20-30 Hz of the correct frequency for
>>             a successful decode to happen. This includes the total of
>>             any error in both the RF frequency and the audio
>>             frequency in FLdigi.
>>
>>
>>
>>         _______________________________________________
>>         aprssig mailing list
>>         aprssig at lists.tapr.org <mailto:aprssig at lists.tapr.org>
>>         http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20200513/d6dd7bea/attachment.html>


More information about the aprssig mailing list