[aprssig] USB GPS for tracker

[Patrick]

It isn't typically easy and would vary depending on the GPS module used in
whatever usb device you have.  That said you can get rs232 GPS from
AliExpress for ~ 12$ so it sorta is to the point that you would be better
off just spending the money for a working off the peg part.

p

On Sun., Jan. 26, 2020, 10:46 p.m. , <jdubner at gmail.com> wrote:

> I have an old Byonics MicroTrak 300 APRS tracker and a couple of different
> USB
> GPS's.  Is there a cheap/fast/good way to adapt a USB GPS for this tracker
> (and
> set the baud rate to 4800)?
>
> All that comes to mind is an Arduino project but that would bring on
> additional
> issues such as power requirements, RFI, size, and weight.
>
> Thanks and 73,
> Joe, K7JD
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20200127/d45a7e1e/attachment.html>