[aprssig] Remoting of Radios

[Jim (List)]

Manufacturer / source?

Sounds interesting.



Jim


-----Original Message-----
From: aprssig <aprssig-bounces at lists.tapr.org> On Behalf Of Robert Bruninga
Sent: 30 May 2019 17:05
To: TAPR APRS Mailing List <aprssig at lists.tapr.org>
Subject: [aprssig] Remoting of Radios

I saw a clever box at Dayton for remoting Radios and Controls over dozens of
feet.

The interconnecting cable was just standard VGA cables.  The "VGA" boxes at
the radio end had the correct pigtails to plug into the radio and the "VGA"
box at the control location had jacks for the Mic, Control Head, data, and
Speaker, etc.

The cleverness was in using the 3 or 4 internally&seaparately shielded
conductors in standard VGA cables to carry the signals while shielded.

And with the phase out of VGA, there are usually tons of VGA cables
appearing in junk boxes everywhere from ten feet to 100 feet.

So save those VGA chassis mount connectors to take advantage of these easy
to find multiconductor multipurpose "VGA" cables.

Bob, WB4APR

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org