[aprssig] Where to buy new digipeater?

[John Hansen]

 The MFJ TNC that has the digipeater board is the similar to the Coastal
ChipWorks TNC-X with the X-Digi board sold here <http://www.tnc-x.com/>.
The main difference is that the X-Digi from Coastal ChipWorks is running a
more recent version of the firmware.

John W2FS


On Wed, Sep 19, 2018 at 1:26 PM, Ev Tupis via aprssig <
aprssig at lists.tapr.org> wrote:

> For simplicity and ruggedness...think "KCP3+", as Bob noted.
>
> If not available, I understand that the MFJ TNC has a "digipeater board
> available, but I have no experience with it.
>
> Ev, W2EV
>
> On Wednesday, September 19, 2018, 7:56:50 AM EDT, Bob Burns W9BU <
> w9bu_lists at rlburns.net> wrote:
>
>
> On 9/18/2018 10:33 PM, MJ Inabnit wrote:
> > I am thinking of buying something new instead of trying to repurpose an
> older kpc3.
> A Kantronics KPC3 or KPC3+ is certainly capable of performing standalone
> digipeater functions. I have a KPC3+ that's been on the air with no
> issues for more than 5 years (knock on wood). Just make sure it has the
> latest firmware which is available from various sources.
>
> The newer solutions mentioned in this thread are also viable answers.
> But, a KPC3 will do the job.
>
> Bob...
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/aprssig_lists.tapr.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20180919/7d9bb14c/attachment.html>