[aprssig] messaging systems

Denis Barton wb8skp at gmail.com
Tue Sep 12 17:12:01 EDT 2017


Bob,

I have the 700 and the 710. both have the voice module. The 700 speaks 
the callsign but the 710 will not speak the callsign

.
Denis
On 9/12/2017 3:14 PM, Robert Bruninga wrote:

> I remember that a D700 with the voice module could actually speak out 
> a message if it was formatted properly.  Actually, I think it mostly 
> spelled callsigns but did have some key words too.
>
> I assume any kenwood APRS radio with the voice module can do this.  
> I’m asking this on the APRSSIG to see if anyone remembers.
>
> And the Byonics.com Tiny trakers support the OUT Message command for 
> remotely turning on and off bits via APRS message. Probably others do 
> as well.
>
> Bob
>
> *From:*Steven Fletcher [mailto:srfletcher at gmail.com 
> <mailto:srfletcher at gmail.com>]
> *Sent:* Saturday, September 09, 2017 2:35 PM
> *To:* Robert Bruninga
> *Subject:* Re[4]: messaging systems
>
> Could a received APRS message (with a certain key word) trigger an 
> alarm on most (or some) existing portable radios with ARPS on them?
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20170912/ecbd4dae/attachment.html>


More information about the aprssig mailing list