[aprssig] SSn-n model for coastal wx alerts

[Dan Srebnick]

It is working now with the commas...spoke to soon.  Not sure why it
didn't work on the first few attempts but verified working now..
Thanks for the response...
73

On Fri, 2017-11-10 at 17:22 -0500, Dan Srebnick wrote:
> Thread seems to have fallen off the list, looping the list back in...
> It didn't work with commas, that was the first method I attempted.
> On Fri, 2017-11-10 at 13:17 -0800, Kenneth Finnegan wrote:
> > I'm actually out at a conference all weekend without a laptop, so I
> > can't say off the top of my head, but I'd expect aprx to support a
> > multihop path just by listing them with commas? Maybe someone else
> > in front of a computer will chime in before I get back. 
> > 
> > Kenneth Finnegan
> > On Nov 10, 2017 10:59, "Dan Srebnick" <k2dls at k2dls.net> wrote:
> > > Kevin, does aprx support multiple via paths on a single
> > > beacon?  I tried a few syntactical variants and it doesn't not
> > > seem to work:
> > > 
> > > beacon via DIGI1,DIGI2
> > > beacon via DIGI1 via DIGI2
> > > 
> > > The question does not seem to be addressed anywhere in the
> > > documentation.
> > > 
> > > 73,
> > > 
> > > Dan
> > > 
> > > On Fri, 2017-11-10 at 08:07 -0800, Kenneth Finnegan wrote:
> > > > If you're only interested in a specific two digis, you could
> > > > instead generate two packets with specific paths of "DIGIA" and
> > > > "DIGIB" or one packet with "DIGIA,DIGIB" to elliminate the need
> > > > to get buy-in and continued support from other operators. 
> > > > 
> > > > Depends if they happen to have digipeating on their own call
> > > > turned on. 
> > > > 
> > > > Kenneth Finnegan
> > > > 
> > > > On Nov 10, 2017 07:34, "Dan Srebnick" <k2dls at k2dls.net> wrote:
> > > > > I live near the NJ shore and send wx alerts via RF that
> > > > > relate to
> > > > > 
> > > > > coastal waters.  There is no need to propagate these alerts
> > > > > inland.
> > > > > 
> > > > > There are a couple of high profile digis along the coast and
> > > > > I was
> > > > > 
> > > > > thinking about using the SSn-N model to create a via path
> > > > > that would
> > > > > 
> > > > > ONLY get digi'd along the coast by participating stations.
> > > > > 
> > > > > 
> > > > > 
> > > > > I was thinking of something along the lines of MMn-N and then
> > > > > asking
> > > > > 
> > > > > the operators of the two digis of interest if they would set
> > > > > that up
> > > > > 
> > > > > using the UIFLOOD definition usually used for SSn-N.
> > > > > 
> > > > > 
> > > > > 
> > > > > Any thoughts or suggestions?
> > > > > 
> > > > > 
> > > > > 
> > > > > _______________________________________________
> > > > > 
> > > > > aprssig mailing list
> > > > > 
> > > > > aprssig at tapr.org
> > > > > 
> > > > > http://www.tapr.org/mailman/listinfo/aprssig
> > > > > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20171110/88d7f9e5/attachment.html>