[aprssig] SSn-n model for coastal wx alerts

[Dan Srebnick]

Thread seems to have fallen off the list, looping the list back in...
It didn't work with commas, that was the first method I attempted.
On Fri, 2017-11-10 at 13:17 -0800, Kenneth Finnegan wrote:
> I'm actually out at a conference all weekend without a laptop, so I
> can't say off the top of my head, but I'd expect aprx to support a
> multihop path just by listing them with commas? Maybe someone else in
> front of a computer will chime in before I get back. 
> 
> Kenneth Finnegan
> On Nov 10, 2017 10:59, "Dan Srebnick" <k2dls at k2dls.net> wrote:
> > Kevin, does aprx support multiple via paths on a single beacon?  I
> > tried a few syntactical variants and it doesn't not seem to work:
> > 
> > beacon via DIGI1,DIGI2
> > beacon via DIGI1 via DIGI2
> > 
> > The question does not seem to be addressed anywhere in the
> > documentation.
> > 
> > 73,
> > 
> > Dan
> > 
> > On Fri, 2017-11-10 at 08:07 -0800, Kenneth Finnegan wrote:
> > > If you're only interested in a specific two digis, you could
> > > instead generate two packets with specific paths of "DIGIA" and
> > > "DIGIB" or one packet with "DIGIA,DIGIB" to elliminate the need
> > > to get buy-in and continued support from other operators. 
> > > 
> > > Depends if they happen to have digipeating on their own call
> > > turned on. 
> > > 
> > > Kenneth Finnegan
> > > 
> > > On Nov 10, 2017 07:34, "Dan Srebnick" <k2dls at k2dls.net> wrote:
> > > > I live near the NJ shore and send wx alerts via RF that relate
> > > > to
> > > > 
> > > > coastal waters.  There is no need to propagate these alerts
> > > > inland.
> > > > 
> > > > There are a couple of high profile digis along the coast and I
> > > > was
> > > > 
> > > > thinking about using the SSn-N model to create a via path that
> > > > would
> > > > 
> > > > ONLY get digi'd along the coast by participating stations.
> > > > 
> > > > 
> > > > 
> > > > I was thinking of something along the lines of MMn-N and then
> > > > asking
> > > > 
> > > > the operators of the two digis of interest if they would set
> > > > that up
> > > > 
> > > > using the UIFLOOD definition usually used for SSn-N.
> > > > 
> > > > 
> > > > 
> > > > Any thoughts or suggestions?
> > > > 
> > > > 
> > > > 
> > > > _______________________________________________
> > > > 
> > > > aprssig mailing list
> > > > 
> > > > aprssig at tapr.org
> > > > 
> > > > http://www.tapr.org/mailman/listinfo/aprssig
> > > > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20171110/aa9dbfa8/attachment.html>