[aprssig] TNC suggestions please

Andrew Rich vk4tec at internode.on.net
Tue Aug 8 21:04:28 EDT 2017

Sorry I missed a point

TCP/IP over 9k6 Kiss ax25 stack

What would be the simplest way to get two raspberry Pi doing TCP/IP over 9k6 ?


Sent from my iPhone

> On 9 Aug 2017, at 10:04 am, Ken Koster <n7ipb at wetnet.net> wrote:
>> On Tuesday, August 8, 2017 4:09:30 PM PDT Andrew Rich wrote:
>> Guys I have an icom 910 radio
>> I want to compliment it with a TNC that will do
>> DSP processing
>> Either serial but prefer USB
>> APRS tracker
>> Command mode
>> Mailbox
>> Node software an advantage
>> 9600 for sats
>> I want to hang it off a raspberry Pi
>> I am putting together an Omni antenna doppler corrected sat gate
>> I am looking at kantronics and timewave
>> Anything else ?
> Let the RPi do it.
> Install a usb radio interface (there are multiple ones available), design your 
> own (thats what I did) or usa a UDRC (http://nwdigitalradio.com/wp-content/
> uploads/2012/04/UDRC-IIDS.pdf)
> Then configure direwolf as the TNC, use it's kiss interface for whatever 
> programs you need for mailbox, command mode etc.
> You couldn't pay me to use a kantronics or timewave tnc anymore.
> -- 
> Ken - N7IPB
> Email: n7ipb at wetnet.net
> JID: n7ipb at jabber.wetnet.net
> PGP Sig: F42B EF90 3CD3 31C7 3056  122E 993A 7B2E 5138 C42A 
> Life isn't like a bowl of cherries.....
> It's more like a jar of jalapenos. 
> What you do today is likely to come back and burn you in the butt tomorrow.
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

More information about the aprssig mailing list