[aprssig] Kenwood TK-760H radios for APRS usage

[Matthew Chambers]

I'm using a TK-762 for my mobile, with the factory add-on accessory cable
and a tinytrak 4. It's been in service since 2013 with no problems.

Matthew Chambers, CBT, NR0Q


On Apr 14, 2017 12:01 PM, "Peter Laws N5UWY" <n5uwy at arrl.net> wrote:

> On Fri, Apr 14, 2017 at 8:11 AM, Bob Burns W9BU <w9bu_lists at rlburns.net>
> wrote:
> > I do not believe you will find RX audio on the mic connector, so you will
> > need a pig tail to the speaker jack on the back of the radio.
>
> There is a factory pigtail that brings everything you could want out
> through an existing hole in the back panel.  I do not have the part
> numbers handy but they are in the aforementioned and linked service
> manual.  And I don't think the cables (we bought one each for VHF and
> UHF radios we acquired for a non-APRS project) were more than $25
> shipped.  Beats poking around inside with a stick.
>
>
> --
> Peter Laws | N5UWY | plaws plaws net | Travel by Train!
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20170415/bb22a75e/attachment.html>