[aprssig] Simple APRS module to use with Arduino

[Jim (List)]

Thanks, but that’s way out the price range.

 

I’m looking at a built solution (without radio) for about $50.

 

 

 

Jim

 

 

From: Robert Bruninga [mailto:bruninga at usna.edu] 
Sent: 13 October 2016 22:56
To: Jim (List)
Subject: RE: [aprssig] Simple APRS module to use with Arduino

 

Sure, the Byonics.com Mircotrack  MTT4B and it includes a 10W transmitter.

bob

 

From: aprssig [mailto:aprssig-bounces at tapr.org] On Behalf Of Jim (List)
Sent: Thursday, October 13, 2016 2:49 PM
To: TAPR APRS Mailing List
Subject: [aprssig] Simple APRS module to use with Arduino

 

I’m looking for an APRS add-on module to use with Arduino, providing simple TX and RX of APRS beacons.

 

It will primarily be sending messages, but ability to also receive would be useful so it can get the message ack.

 

Cost is a factor as, if the project is successful, I’ll be looking to build about a dozen units.

 

I’m aware of the Argent Data Shield, wondering if there is anything else out there.

 

 

 

Jim, G1HUL

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20161014/03889c0f/attachment.html>