[aprssig] Argent arduino shield

Scott Miller scott at opentrac.org
Mon Jun 13 12:24:49 EDT 2016


Yes, it will transmit and receive.  The RX side is a little picky about 
signal levels and doesn't have much filtering, so try to give it a clean 
signal.

Scott
N1VG

On 6/12/2016 12:24 PM, Andrew rich via aprssig wrote:
>
> Can the argent arduino shield tx and rx ?
>
> I see code to tx and rx but can it do it like a tnc ?
>
> i guess u could spend most of your time rx unless a tx event is needed ?
>
> plan to use the uart on an arduino to talk to shield
>
> software serial gps
>
> Mr Andrew Rich
>
> vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>
>
> vk4tec at internode.on.net <mailto:vk4tec at internode.on.net>
>
> http://www.tech-software.net
>
> 0419 738 223
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20160613/48db9a83/attachment.html>


More information about the aprssig mailing list