[aprssig] SATgates ? (again)

[Andre]

Op 24-01-16 om 22:43 schreef Jason KG4WSV via aprssig:
> 
> 
> On Sun, Jan 24, 2016 at 3:09 PM, Robert Bruninga via aprssig
> <aprssig at tapr.org <mailto:aprssig at tapr.org>> wrote:
> 
>     >... What you're describing is trying to use the APRS-IS as a local
>     RF analysis tool.
> 
>     No, I'm trying to make the APRS satellites work as a useful
>     constellation and to have their integration into the APRS-IS work in
>     a consistent manner all over the world.
> 
> 
> It does - it treats your hypothetical "satgate" just like any other Igate.
> 
>  
> 
>     I'm just trying to identify IGate code that has this SATgate mode so
>     that we can know what software to recommend for SATgate use.
> 
> 
> 
> There isn't any.  But that's OK, since there isn't a special version of
> APRS-IS stripped of deduplication running in your hypothetical "satgate"
> mode to connect them to.
> 
> This is exactly the same non-problem as using APRS-IS for RF propagation
> analysis.  APRS-IS simply isn't designed for that, and the way it is
> designed actively prevents its use in that manner.
> 
> -Jason
> kg4wsv
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
> 
The solution is the same as firenet used, setup a seperate IS for the
satgates without dupe supression and connect that to the aprs-is with
dupe supression at the gate between the 2, that way aprs-is does not
need to change and you can still have the sat info gathering at the
seperate IS and message forwarding to APRS-IS

73 de Andre PE1RDW