[aprssig] KPC-3 Ver 8.0 Digpeater settings

[John]

Thanks Kris,

It turns out that the KPC-3+ is version 8.3 so I'll use the info for that

John

On 2/22/2016 8:25 PM, Kriss A Kliegle via aprssig wrote:
> Try reading the following:
>
> http://www.aprs.org/kpc3/kpc3+82WIDEn.txt
>
> Buried deep in there is a command that might help, but with a cost....
> not proper handling of the 'new paradigm' due to the age of the TNC.
> It only sends packets out one hop after, not subtracting one from the
> N value and sending it along the way.
>
> Near the bottom of the above page is the following: