[aprssig] Help with Digi settings

Robert Bruninga bruninga at usna.edu
Sun Feb 21 20:46:57 EST 2016

I may not be remebering right,,but if it has a UIDIGI command, then that
command should be:


If it does not have a UIDIGI command, then it cannot do any kind of WIDEn-N
and can only digi its one ALIAS.  In that case, make it WIDE1-1.


On Sun, Feb 21, 2016 at 12:22 PM, John via aprssig <aprssig at tapr.org> wrote:

> Hi,
> I have a digi on the air, it uses a KPC-3 (not a plus) ver 8.0 and is
> used as a wide area digi.
> It appears to have a problem. If it hears a station that has a path of
> wide1-1,wide2-1 it will not digi it, but if that station has been digied
> by a wide1-1 station then it will digi it.
> What did I do wrong since it's my understanding that a wide area digi
> should digi both on wide1-1 and on wide2-1, and a home digi just on
> wide1-1, is that correct?
> Thanks,
> John
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20160221/4c49487c/attachment.html>

More information about the aprssig mailing list