[aprssig] Repeater objects

[Andre]

And don't forget that anyone can make an aprs praser that can tune a
second radio trough CAT for instance using an arduino, after all
hamradio is about experimenting so we are not tied to existing solutions.

73 de Andre PE1RDW

Op 14-09-15 om 01:35 schreef David Andrzejewski via aprssig:
> Also, what would be wrong with advertising a repeater that an APRS radio
> can't use?  Just because my Kenwood D710GA can't do 6 meters doesn't
> mean I don't have another radio in the car that does.  Is that really
> considered too spammy?
> 
> - Dave/KD8TWG
> 
> 
> Javier Henderson via aprssig wrote:
>>> On Sep 13, 2015, at 2:09 PM, Jeff Dugas (Mobile) via aprssig <aprssig at tapr.org> wrote:
>>>
>>> "So you're saying only 2m and 70cm repeaters should be beaconed because the special APRS radios don't cover other bands?"
>>>
>>> Are there *any* radios that can auto-tune to frequencies other that 2M/440 from a received packet with such information formatted in the comments?
>>>
>>> The OP was addressing the Tune/QSY feature.
>>
>> I think my D710 will tune a 222 MHz repeater, even if it can’t transmit on that frequency, but because it can receive it.
>>
>> 73,
>> -jav k4jh
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
> 
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>