[aprssig] Fossil-fuel-free-Fieldday Fun

[Kenneth Finnegan]

No.

If anyone shows up to my field day operations and starts trying to run
300VDC across the parking lot using indoor lamp cord, they are immediately
getting sent home.

Field Day does not include a provision for an acceptable mortality rate.
300VDC on a breadboard is very different than 300VDC snaking around a
campground.

Kenneth Finnegan
On Jun 11, 2015 7:13 AM, "Robert Bruninga via aprssig" <aprssig at tapr.org>
wrote:

> Eventually we should get to a fossil-fuel-free fieldday.  It is easy to
> avoid that stink-pot-foul smelling-polluting-noisey generator by just
> running some small conductor wire to every car parked at Fieldday.
> Parallel them all and without drawing more than 100W from each car, you can
> provide over a kW throughout fieldday just from batteries.
>
>
>
> Just plug in 100W cigarette lighter inverters into each car, add two caps
> and two diodes to double the 60 Hz 120v up to 330 VDC and distribute that
> to all the operating positions.  Then just plug in standard SWITCHING power
> supplies wherever needed to the 330VDC and get all the 12v AMPS you need at
> each site.
>
>
>
> By upconverting to 330 VDC there are several advantages:
>
> 1)      Distribution wire size is only 1% of what it would need to be at
> 12v and only 10% of what it would be at 120v
>
> 2)      You can deliver over 1 kW via simple #18 zip cord over hundreds
> of feet and still only draw 3 amps, well below the rating of the wire.
>
> 3)      You can parallel as many cars as you like at 330 VDC for
> distributed energy
>
> 4)      10 solar panels in series can provide 330 VDC at 7 amps (over 2
> kW)
>
> 5)      Or you can put microinverters ($125) on each solar panel to
> gernerate the 120vac (into 330VDC) for distributed power
>
>
>
> The disadvantage is re-educating ham operators about high voltage DC
> safety.
>
>
>
> After field day and crises at work, I hope to come up with a general idea
> and concept, and connectors, and safety features to make this a
> come-as-you-are way to make emergency field power not just for fielday but
> for everyday as-needed use.
>
>
>
> Remember, every HYBRID comes to Field Day with a few kWh of energy already
> at high voltage, and every electric car comes with 10 to 20 kWh of energy.
> But the easiest place to tap in, is still, the cigarette lighter at 12v and
> then  upconvert to 330 VDC for distribution and then down convert back to
> 12v for universal usage at the station…
>
>
>
> I have done that over 3000’ using nothing but one #24 wire and Ground.
> See  http://aprs.org/aprs-swer.html
>
> But for Fieldday distances, better to avoid the ground loop and simply run
> two-conductor zip cord or other convenient wire.
>
>
>
> If you don’t understand HV DC, then ignore this and stay away.  Remember
> even 8 year old cub scouts when I was a kid built HV Tube radios as a
> standard requirement with open wiring on mom’s spare breadboard… and none
> died…
>
>
>
> Bob, Wb4APR
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20150611/9ef5c33f/attachment.html>