[aprssig] Satgate

[John Fickes]

 Group

     Thank you guys for the help. I downloaded Satgate version 1 for UISS
and that seems to have taken care of the problem. So there must be
something with Version 2. Thanks again for your help and your time.
        John   W0JW   73


On Fri, Aug 14, 2015 at 8:28 AM, Andrew P. via aprssig <aprssig at tapr.org>
wrote:

> And should have checked my spelling before hitting Send. I meant @ or /,
> not @ or . as timestamped position reports.
>
> ------------------------------
> To: aprssig at tapr.org
> Date: Fri, 14 Aug 2015 07:49:30 -0400
> Subject: Re: [aprssig] Satgate
> From: aprssig at tapr.org
>
> No, that's a valid format, according to the APRS protocol specification
> (chapter 8). Position reports starting with @ or . are specified to have a
> timestamp prefix prior to the latitude; position reports starting with ! or
> = do not have the timestamp. Now, whether a given gating package properly
> supports all four formats is another question (for example, DuchiSat1 is
> restricted to only use ! format with compressed encoding).
>
> I've checked this recently, because I just recently updated my software
> (YAAC) to support all four formats instead of only the = format it formerly
> beaconed.
>
> Andrew Pavlin, KA2DDO
> author of YAAC
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20150816/cb404988/attachment.html>