[aprssig] Connecting to the APRS-IS

[Michael Heskett]

Works for me. I just changed from noam.aprs2.net to texas.aprs3.net.

 

Michael Heskett

WB5QLD

 

From: aprssig [mailto:aprssig-bounces at tapr.org] On Behalf Of Max Harper via aprssig
Sent: Friday, August 07, 2015 12:09 PM
To: aprssig <aprssig at tapr.org>
Subject: [aprssig] Connecting to the APRS-IS

 

Are we not allowed to connect to the Tier 2 server of our choice anymore. I had shutdown my igate and made a symbol change and when I brought it back up it wouldn't connect to texas.aprs2.net. All I got was "FAIL - Connect to texas.aprs2.net:14580 failed: address resolution failure - errno=0" I used Texas because it was the most reliable server I had found. I had a link on my phone so I could check to make sure I remained connected.

 

It sure would be nice if the aprs community would get notices of such changes.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20150807/7c9d51cb/attachment.html>