[aprssig] Here we go again...sigh

[Chuck Gooden]

Jim,

You have a good idea and it would be nice if you could write the article 
for QST.   Writing an article may require some research on your part but 
that would be part of the learning process and would increase your 
knowledge in the hobby.  I would encourage you to take action and make 
it happen.

Chuck Gooden - N9QBT
Rockford, IL


On 7/12/2014 12:12 PM, Jim Wagner wrote:
> I'd bet that most of the balloon folks are occasional or rare APRS users. Maybe never before. How are they to know - bet they have no information that even tells them how a digi path works, let alone the knowledge to make a "best judgement".
>
> Is there a central web site (or several) where balloon people go for technical information? That would be a great place to post something about configuring APRS for balloon flights.
>
> How about QST or other general distribution ham venues? A short bit on beacon rates and preferred paths for balloons might actually get where it needs to go.
>
> Jim Wagner, KA7EHK
> Tangent, OR, USA
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
>