[aprssig] TM-D710 control

[Steve Noskowicz]

Andrew,
 
This appears to be the most recent command listing by Kai and a few others.  
It looks like for the VFO, it is either FO or PV depending how you want to do it.
 LA3QMA Kai Gunter Brandt has the info: 
http://la3qma.aprs.la/downloadplugins/doc_details/10-kenwood-v71--tm-d710-pc-control-commands
73, Steve, K9DCI
 

________________________________
 From: Andrew Rich <vk4tec at tech-software.net>
To: TAPR APRS Mailing List <aprssig at tapr.org> 
Sent: Tuesday, February 25, 2014 3:21 PM
Subject: Re: [aprssig] TM-D710 control
  


That's odd 

I can not get the d710 to do any command other than tnc via the head 

Also d710 group confirms d710 freq is set via body

What is freq command ? Read or set 

Andrew 

Sent from my iPhone

On 26 Feb 2014, at 8:09 am, Tony VE6MVP <tony at ve6mvp.com> wrote:


At 01:44 PM 2014-02-24, Andrew Rich wrote:
>
>Found it 
>> 
>>+ The radio body port is for freq etc
>>+ The head port is for TNC 
>No, it's not that simple.  The radio body com port is for updating
the radio body firmware and the memory.   The head com port is
for updating the control head firmware, TNC settings, and current A and B
side radio settings including frequency, offset and tone.  
And, of course, send and receiving data packets..
>
>Tony 
_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>http://www.tapr.org/mailman/listinfo/aprssig
>
_______________________________________________
aprssig mailing list
aprssig at tapr.org
http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20140225/f88f085b/attachment.html>