[aprssig] TM-D710 control

[Tony VE6MVP]

At 01:44 PM 2014-02-24, Andrew Rich wrote:
>Found it
>
>+ The radio body port is for freq etc
>+ The head port is for TNC

No, it's not that simple.  The radio body com port is for updating 
the radio body firmware and the memory.   The head com port is for 
updating the control head firmware, TNC settings, and current A and B 
side radio settings including frequency, offset and tone.   And, of 
course, send and receiving data packets..

Tony 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20140225/e5a42fb4/attachment.html>