[aprssig] TM-D710 control
vk4tec at tech-software.net
Mon Feb 24 15:44:08 EST 2014
+ The radio body port is for freq etc
+ The head port is for TNC
- Andrew -
From: Andrew Rich [mailto:vk4tec at tech-software.net]
Sent: Monday, 24 February 2014 4:52 PM
To: 'TAPR APRS Mailing List'
Subject: RE: [aprssig] TM-D710 control
The D710 has two com ports as well
One on the head and one on the radio body
And "DATA" but thats an audio type port
- Andrew -
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Tony VE6MVP
Sent: Monday, 24 February 2014 4:40 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] TM-D710 control
At 02:37 PM 2014-02-23, Tony VE6MVP wrote:
http://www.qsl.net/k7jar/pages/D700Cmds.html has the commands documented.
With a terminal program I'm sure you can send the appropriate commands
yourself with a terminal program.
Oops. The above is for the D700 which appears to have one serial port for
both the radio and the TNC. Therefore I don't know if the following
paragraph is correct.
>From what I can see you can also set the B side frequency, offset and tone.
I'd really, really like to see the Repeaterbook Android app build in this
capability so I can click on the screen and change the D710 frequency. Of
course this would also require a Bluetooth to serial port adapter on the
D710. Or that I can do something similar when I see a nearby repeater
object coming in on an APRS Android app.
I did find some information at
links at the bottom.. Ahh, here we go. This PDF file has the commands in
it. http://n3ujj.com/manuals/control_commands.pdf but it's rather
I'd suggest joining the Yahoo TM-D710_TM-V71 group and asking in there. I
see that at least Kai, who was a co-author of the control_commands.pdf file
is active in that mailing list.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig