[aprssig] Kwd D7 drop in charger

[Robert Bruninga]

My D7 drop-in charger (BC19) developed an intermittent at the DC connector
on the back.



Just drop the bottom, and without even removing the ckt board, you can
re-solder the connections.



This is the second one I have had to do this to in 15 years, so it is a
rare, but apparently reproducible problem.



Bob, WB4aPR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20140422/d1d27371/attachment.html>