[aprssig] aprssig Digest, Vol 111, Issue 16
Jason Low
jay911 at gmail.com
Sat Sep 21 14:34:37 EDT 2013
If you folks asking if it will work without the head, yes and no. If you
mean without the ORIGINAL head, yes, it will - I replaced my busted-up
(volume/squelch knobs bent and damaged) head with a new RC-D710 that I
bought last year. I keep the damaged head to use as a TNC for various other
projects like on my Maxtrac or with the interface kit, with any 2-pin
(mic/sp) handheld.
If you mean will the D710 work without any head attached, you are correct,
it will not function. It needs to have either the factory head or a RC-D710
on it. (I don't know about the head that comes with the 700.)
On Sat, Sep 21, 2013 at 11:00 AM, <aprssig-request at tapr.org> wrote:
> Send aprssig mailing list submissions to
> aprssig at tapr.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.tapr.org/mailman/listinfo/aprssig
> or, via email, send a message with subject or body 'help' to
> aprssig-request at tapr.org
>
> You can reach the person managing the list at
> aprssig-owner at tapr.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of aprssig digest..."
>
>
> Today's Topics:
>
> 1. Re: Anybody Missing a D710? (Lee Mushel)
> 2. Re: Anybody Missing a D710? (Erv Heimbuck)
> 3. Re: Anybody Missing a D710? (Charles Doughtie)
> 4. Re: Anybody Missing a D710? (Chuck Gooden)
> 5. Re: Anybody Missing a D710? (Steve Daniels)
> 6. Re: Anybody Missing a D710? (Steve Noskowicz)
> 7. Re: Anybody Missing a D710? (Brett Friermood)
> 8. Re: Anybody Missing a D710? (Lee Mushel)
> 9. Re: Anybody Missing a D710? (Charles Doughtie)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 20 Sep 2013 16:33:36 -0600
> From: "Lee Mushel" <herbert3 at centurytel.net>
> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID: <D322778D82964152951625437A5B7201 at NewComputer>
> Content-Type: text/plain; format=flowed; charset="UTF-8";
> reply-type=original
>
> I put in a bid so that I could ask the seller a question. This was done
> but he has not responded so far (ten hours) and eBay still hasn't
> indicated
> that anyone has asked a question! I think you are right about the smell!
>
> Lee K9WRU
> ----- Original Message -----
> From: "Keith VE7GDH" <ve7gdh at rac.ca>
> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> Sent: Friday, September 20, 2013 9:42 AM
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
> > Bob WB4APR wrote?
> >
> >> Unfortunately, the APRS callsign is in the control head, not the radio
> so
> >> it is not traceable that way?
> >
> > Hopefully a licensed amateur radio operator will purchase it and get the
> > serial number to the authorities and major dealers and see if it has been
> > reported stolen. I could think of a few reasons why the body could end up
> > for sale, but do agree that it sounds fishy.
> >
> > 73 Keith VE7GDH
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > http://www.tapr.org/mailman/listinfo/aprssig
> >
> >
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 20 Sep 2013 14:50:27 -0700
> From: "Erv Heimbuck" <erv at heimbuck.com>
> To: "'TAPR APRS Mailing List'" <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID: <028901ceb64b$6da7a9b0$48f6fd10$@com>
> Content-Type: text/plain; charset="UTF-8"
>
> I also asked a question that has been ignored so far
>
> Erv K0OTZ
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 20 Sep 2013 15:05:17 -0700 (PDT)
> From: Charles Doughtie <n5exy at yahoo.com>
> To: TAPR APRS Mailing List <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID:
> <1379714717.45027.YahooMailNeo at web142601.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> What is being asked? Perhaps all of us could "saturate the target" with
> the same questions - - -
>
> Works and is in good condition. Wonder if there are any mods - - -
>
>
> ?
> de Charlie, N5EXY, Grid EM10fl,
> South Suburban Greater Hutto
>
>
>
>
>
>
> ________________________________
> From: Erv Heimbuck <erv at heimbuck.com>
> To: 'TAPR APRS Mailing List' <aprssig at tapr.org>
> Sent: Friday, September 20, 2013 4:50 PM
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
> I also asked a question that has been ignored so far
>
> Erv K0OTZ
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://www.tapr.org/pipermail/aprssig/attachments/20130920/866d2e5c/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Fri, 20 Sep 2013 17:21:23 -0500
> From: Chuck Gooden <Chuck.Gooden at comcast.net>
> To: aprssig at tapr.org
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID: <523CCA63.3020409 at comcast.net>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
>
> Will it even work without the head? I thought the THD700 had to have
> both the base and the head to function. I assume the D710 would be the
> same.
>
> Really nice soldering job on the fuse though.
>
>
> On 9/20/2013 5:33 PM, Lee Mushel wrote:
> > I put in a bid so that I could ask the seller a question. This was
> > done but he has not responded so far (ten hours) and eBay still
> > hasn't indicated that anyone has asked a question! I think you are
> > right about the smell!
> >
> > Lee K9WRU
> > ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
> > To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> > Sent: Friday, September 20, 2013 9:42 AM
> > Subject: Re: [aprssig] Anybody Missing a D710?
> >
> >
> >> Bob WB4APR wrote?
> >>
> >>> Unfortunately, the APRS callsign is in the control head, not the
> >>> radio so it is not traceable that way?
> >>
> >> Hopefully a licensed amateur radio operator will purchase it and get
> >> the serial number to the authorities and major dealers and see if it
> >> has been reported stolen. I could think of a few reasons why the body
> >> could end up for sale, but do agree that it sounds fishy.
> >>
> >> 73 Keith VE7GDH
> >> _______________________________________________
> >> aprssig mailing list
> >> aprssig at tapr.org
> >> http://www.tapr.org/mailman/listinfo/aprssig
> >>
> >>
> >
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > http://www.tapr.org/mailman/listinfo/aprssig
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 20 Sep 2013 23:24:35 +0100
> From: "Steve Daniels" <steve at daniels270.eclipse.co.uk>
> To: "'Charles Doughtie'" <n5exy at yahoo.com>, "'TAPR APRS Mailing List'"
> <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID: <8A8F9A5EE6A14B39B431ABD6AF737BBE at stevePC>
> Content-Type: text/plain; charset="us-ascii"
>
> I don't see anything much out of the ordinary, ok missing front panel is a
> bit odd, but not the cut cables so much.
>
> Used to work making 4cx250 tubes, so I could query the 4cx350 he has on
> offer, I know more than any sane person needs to no about those.
>
>
>
> As an aside I have several air cooled and conduction cooled 2C39's if
> anyone
> wants them, free to a good home.
>
>
>
> Steve Daniels
>
> Amateur Radio Callsign G6UIM
>
> Torbay Freecycle Owner
>
> http://uk.groups.yahoo.com/group/torbay_freecycle
>
> APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com
>
>
>
> _____
>
> From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
> Of Charles Doughtie
> Sent: 20 September 2013 23:05
> To: TAPR APRS Mailing List
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>
> What is being asked? Perhaps all of us could "saturate the target" with the
> same questions - - -
>
> Works and is in good condition. Wonder if there are any mods - - -
>
>
>
>
>
> de Charlie, N5EXY, Grid EM10fl,
> South Suburban Greater Hutto
>
>
>
>
>
>
>
>
> _____
>
> From: Erv Heimbuck <erv at heimbuck.com>
> To: 'TAPR APRS Mailing List' <aprssig at tapr.org>
> Sent: Friday, September 20, 2013 4:50 PM
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
> I also asked a question that has been ignored so far
>
> Erv K0OTZ
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://www.tapr.org/pipermail/aprssig/attachments/20130920/9978c752/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 6
> Date: Fri, 20 Sep 2013 16:18:46 -0700 (PDT)
> From: Steve Noskowicz <noskosteve at yahoo.com>
> To: TAPR APRS Mailing List <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID:
> <1379719126.28279.YahooMailNeo at web140606.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> From: Chuck Gooden <Chuck.Gooden at comcast.net>
> ?
> >? Will it even work without the head?? I thought the THD700 had to have
> >? both the base and the head to function.? I assume the D710 would be the
> >? same.
>
> ? FYI:? The D700 CAN be operated WITHOUT a control head, via the Serial
> port.? I've done it.? My Excel workbook for the D700 does it just fine.
> ?? http://k9dci.home.comcast.net/site/?/page/Amateur_Radio_Control/?
>
> I don't own a D710 so I can't try it.
> --
> 73, Steve, K9DCI
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://www.tapr.org/pipermail/aprssig/attachments/20130920/9d66e67e/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 7
> Date: Fri, 20 Sep 2013 19:37:33 -0500
> From: Brett Friermood <brett.friermood at gmail.com>
> To: TAPR APRS Mailing List <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID:
> <
> CADS0AtS5H3vQwNuL1DtC7uFoEMJuxWy3pPQt_M1D+tnLjmvbwA at mail.gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> No, I don't believe so. My V71a, which is the same body just a different
> head, will not function without a connection to the head. I found this out
> last weekend when the radio would not turn on after moving a cable bundle.
> Turns out my control head wiring has a flakey connection which needs to
> reworked.
>
> Granted I was not computer controlling it right then, but until the head
> was properly connected the start-up beep would not occur.
>
> Brett KQ9N
> On Sep 20, 2013 5:21 PM, "Chuck Gooden" <Chuck.Gooden at comcast.net> wrote:
>
> >
> > Will it even work without the head? I thought the THD700 had to have
> both
> > the base and the head to function. I assume the D710 would be the same.
> >
> > Really nice soldering job on the fuse though.
> >
> >
> > On 9/20/2013 5:33 PM, Lee Mushel wrote:
> >
> >> I put in a bid so that I could ask the seller a question. This was
> done
> >> but he has not responded so far (ten hours) and eBay still hasn't
> >> indicated that anyone has asked a question! I think you are right
> about
> >> the smell!
> >>
> >> Lee K9WRU
> >> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
> >> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> >> Sent: Friday, September 20, 2013 9:42 AM
> >> Subject: Re: [aprssig] Anybody Missing a D710?
> >>
> >>
> >> Bob WB4APR wrote?
> >>>
> >>> Unfortunately, the APRS callsign is in the control head, not the radio
> >>>> so it is not traceable that way?
> >>>>
> >>>
> >>> Hopefully a licensed amateur radio operator will purchase it and get
> the
> >>> serial number to the authorities and major dealers and see if it has
> been
> >>> reported stolen. I could think of a few reasons why the body could end
> up
> >>> for sale, but do agree that it sounds fishy.
> >>>
> >>> 73 Keith VE7GDH
> >>> ______________________________**_________________
> >>> aprssig mailing list
> >>> aprssig at tapr.org
> >>> http://www.tapr.org/mailman/**listinfo/aprssig<
> http://www.tapr.org/mailman/listinfo/aprssig>
> >>>
> >>>
> >>>
> >>
> >> ______________________________**_________________
> >> aprssig mailing list
> >> aprssig at tapr.org
> >> http://www.tapr.org/mailman/**listinfo/aprssig<
> http://www.tapr.org/mailman/listinfo/aprssig>
> >>
> >
> > ______________________________**_________________
> > aprssig mailing list
> > aprssig at tapr.org
> > http://www.tapr.org/mailman/**listinfo/aprssig<
> http://www.tapr.org/mailman/listinfo/aprssig>
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://www.tapr.org/pipermail/aprssig/attachments/20130920/c7b8900b/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 8
> Date: Fri, 20 Sep 2013 20:26:27 -0600
> From: "Lee Mushel" <herbert3 at centurytel.net>
> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID: <8BEA381E232640E9864841861F6E6419 at NewComputer>
> Content-Type: text/plain; format=flowed; charset="utf-8";
> reply-type=response
>
> Gentlemen:
>
> eBay cancelled my bid at 6:39. someone must have told them it was a
> stolen
> item.
>
> 73
>
> Lee K9WRU
> ----- Original Message -----
> From: "Chuck Gooden" <Chuck.Gooden at comcast.net>
> To: <aprssig at tapr.org>
> Sent: Friday, September 20, 2013 4:21 PM
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
> >
> > Will it even work without the head? I thought the THD700 had to have
> both
> > the base and the head to function. I assume the D710 would be the same.
> >
> > Really nice soldering job on the fuse though.
> >
> >
> > On 9/20/2013 5:33 PM, Lee Mushel wrote:
> >> I put in a bid so that I could ask the seller a question. This was
> done
> >> but he has not responded so far (ten hours) and eBay still hasn't
> >> indicated that anyone has asked a question! I think you are right
> about
> >> the smell!
> >>
> >> Lee K9WRU
> >> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
> >> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> >> Sent: Friday, September 20, 2013 9:42 AM
> >> Subject: Re: [aprssig] Anybody Missing a D710?
> >>
> >>
> >>> Bob WB4APR wrote?
> >>>
> >>>> Unfortunately, the APRS callsign is in the control head, not the radio
> >>>> so it is not traceable that way?
> >>>
> >>> Hopefully a licensed amateur radio operator will purchase it and get
> the
> >>> serial number to the authorities and major dealers and see if it has
> >>> been reported stolen. I could think of a few reasons why the body could
> >>> end up for sale, but do agree that it sounds fishy.
> >>>
> >>> 73 Keith VE7GDH
> >>> _______________________________________________
> >>> aprssig mailing list
> >>> aprssig at tapr.org
> >>> http://www.tapr.org/mailman/listinfo/aprssig
> >>>
> >>>
> >>
> >>
> >> _______________________________________________
> >> aprssig mailing list
> >> aprssig at tapr.org
> >> http://www.tapr.org/mailman/listinfo/aprssig
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > http://www.tapr.org/mailman/listinfo/aprssig
> >
> >
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Fri, 20 Sep 2013 18:54:41 -0700 (PDT)
> From: Charles Doughtie <n5exy at yahoo.com>
> To: TAPR APRS Mailing List <aprssig at tapr.org>
> Subject: Re: [aprssig] Anybody Missing a D710?
> Message-ID:
> <1379728481.6299.YahooMailNeo at web142602.mail.bf1.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> ""This listing was ended by the seller because there was an error in the
> listing.""
>
> ?
> de Charlie, N5EXY, Grid EM10fl,
> South Suburban Greater Hutto
>
>
>
>
>
> ________________________________
> From: Lee Mushel <herbert3 at centurytel.net>
> To: TAPR APRS Mailing List <aprssig at tapr.org>
> Sent: Friday, September 20, 2013 9:26 PM
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
> Gentlemen:
>
> eBay cancelled my bid at 6:39.? someone must have told them it was a
> stolen
> item.
>
> 73
>
> Lee? K9WRU
> ----- Original Message -----
> From: "Chuck Gooden" <Chuck.Gooden at comcast.net>
> To: <aprssig at tapr.org>
> Sent: Friday, September 20, 2013 4:21 PM
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
> >
> > Will it even work without the head?? I thought the THD700 had to have
> both
> > the base and the head to function.? I assume the D710 would be the same.
> >
> > Really nice soldering job on the fuse though.
> >
> >
> > On 9/20/2013 5:33 PM, Lee Mushel wrote:
> >> I put in a bid so that I could ask the seller a question.? This was
> done
> >> but he has not responded so far (ten hours)? and eBay still hasn't
> >> indicated that anyone has asked a question!? I think you are right
> about
> >> the smell!
> >>
> >> Lee? K9WRU
> >> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
> >> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> >> Sent: Friday, September 20, 2013 9:42 AM
> >> Subject: Re: [aprssig] Anybody Missing a D710?
> >>
> >>
> >>> Bob WB4APR wrote?
> >>>
> >>>> Unfortunately, the APRS callsign is in the control head, not the radio
> >>>> so it is not traceable that way?
> >>>
> >>> Hopefully a licensed amateur radio operator will purchase it and get
> the
> >>> serial number to the authorities and major dealers and see if it has
> >>> been reported stolen. I could think of a few reasons why the body could
> >>> end up for sale, but do agree that it sounds fishy.
> >>>
> >>> 73 Keith VE7GDH
> >>> _______________________________________________
> >>> aprssig mailing list
> >>> aprssig at tapr.org
> >>> http://www.tapr.org/mailman/listinfo/aprssig
> >>>
> >>>
> >>
> >>
> >> _______________________________________________
> >> aprssig mailing list
> >> aprssig at tapr.org
> >> http://www.tapr.org/mailman/listinfo/aprssig
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > http://www.tapr.org/mailman/listinfo/aprssig
> >
> >
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://www.tapr.org/pipermail/aprssig/attachments/20130920/dac49714/attachment-0001.html
> >
>
> ------------------------------
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
>
> End of aprssig Digest, Vol 111, Issue 16
> ****************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20130921/cad49e4a/attachment.html>
More information about the aprssig
mailing list