[aprssig] Can someone make one of these ?

[Mark Cheavens]

WOW,
This could be the real KILLER aprs device!

http://www.meetearl.com/
Thank you for sharing.

Mark
KC5EVE
At 08:44 PM 11/19/2013, you wrote:
>I guess nobody noticed, if you go to 
><http://www.meetearl.com/updates/>http://www.meetearl.com/updates/ 
>and read down a bit, you'll see that they are
>likely to have Part 97 suitability at maybe 2 watts on 2M and 70cM 
>with an SMA connector. This will run Android
>and be around US$300.00
>
>
>
>On 11/19/2013 03:17 PM, Andrew Rich wrote:
>>Have a go
>>
>>Sent from my iPhone
>>
>>On 20/11/2013, at 2:08 AM, John Willis 
>><<mailto:john.r.willis at hotmail.com>john.r.willis at hotmail.com> wrote:
>>
>>>Price? Yep, somewhere north of 30K!!
>>>
>>>
>>>----------
>>>Date: Sun, 17 Nov 2013 15:05:38 -0500
>>>From: <mailto:ky9k-lists at ky9k.org>ky9k-lists at ky9k.org
>>>To: <mailto:aprssig at tapr.org>aprssig at tapr.org
>>>Subject: Re: [aprssig] Can someone make one of these ?
>>>
>>>Already available. Internal or external GPS, selectable waveforms 
>>>including 1.2MHz or 5MHz channels data channels,  frequency agile 
>>>225-2000MHz for network waveforms,  ethernet interface to external 
>>>tablets/etc, capable of narrowband SATCOM, DAMA.....
>>>
>>><http://rf.harris.com/capabilities/tactical-radios-networking/an-prc-117g/>http://rf.harris.com/capabilities/tactical-radios-networking/an-prc-117g/
>>>
>>>The price might be a bit of an obstacle.
>>>
>>>I've been working with these for a while now and love them.
>>>
>>>73-KY9K/Brian
>>>
>>>
>>>On 11/15/2013 4:19 PM, Andrew Rich wrote:
>>>
>>>At the end of the day
>>>
>>>
>>>
>>>You could just run Mobile Phone as the "radio" bit
>>>
>>>
>>>
>>>But that's not ham radio is it
>>>
>>>
>>>
>>>- Andrew-
>>>
>>>
>>>
>>>----------
>>>From: <mailto:aprssig-bounces at tapr.org>aprssig-bounces at tapr.org 
>>>[mailto:aprssig-bounces at tapr.org] On Behalf Of Tony VE6MVP
>>>Sent: Saturday, 16 November 2013 5:41 AM
>>>To: TAPR APRS Mailing List
>>>Cc: <mailto:aprssig at tapr.org>aprssig at tapr.org
>>>Subject: Re: [aprssig] Can someone make one of these ?
>>>
>>>
>>>
>>>At 12:15 PM 2013-11-15, Andrew P. wrote:
>>> >All of these still look klunky. I think the ideal was to have one box,
>>> >period. Not three boxes without cables (thanks to Bluetooth), but only
>>> >one box that did it all.
>>>
>>>I agree with you.  I'd like to see the Kenwood D710 next version 
>>>with two Bluetooth serial port adapters.  Then I can use my 
>>>Android tablet with it.
>>>
>>>Tony
>>>
>>>
>>>
>>>_______________________________________________
>>>
>>>aprssig mailing list
>>>
>>><mailto:aprssig at tapr.org>aprssig at tapr.org
>>>
>>>http://www.tapr.org/mailman/listinfo/aprssig
>>>
>>>
>>>_______________________________________________ aprssig mailing 
>>>list <mailto:aprssig at tapr.org>aprssig at tapr.org 
>>>http://www.tapr.org/mailman/listinfo/aprssig
>>>_______________________________________________
>>>aprssig mailing list
>>><mailto:aprssig at tapr.org>aprssig at tapr.org
>>>http://www.tapr.org/mailman/listinfo/aprssig
>>
>>
>>
>>_______________________________________________
>>aprssig mailing list
>><mailto:aprssig at tapr.org>aprssig at tapr.org
>>http://www.tapr.org/mailman/listinfo/aprssig
>
>
>
>--
>-- --
>--    "Saving peoples' lives
>    so they may live long enough
>      to become witty."
>
>   Ed Lizard Rosen FF/EMTB N3GXH
>    <mailto:n3gxh at arrl.net>n3gxh at arrl.net
>    <mailto:n3gxh at winlink.org>n3gxh at winlink.org (on the road)
>    Days   410 965-8498
>    Eves   410 655-4956
>    Nextel 443 677-1427
>Where was I now? 
><http://www.findu.com/cgi-bin/find.cgi?N3GXH*>http://www.findu.com/cgi-bin/find.cgi?N3GXH*
>(n3gxh-3 is the Jeep, -1 is home, -2 is work, -14 is the truck)
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20131120/8c77cafe/attachment.html>