[aprssig] Igate packets

[Ray Wells]

I ran dixprs on the RPi for a while and it worked fine. If not for wifi 
(to access my LAN) reliability issues I might still be running it. On my 
600MHz P3 with 512M RAM dixprs uses around 20% of the cpu and <2% of 
RAM, well within the RPi's capacity.

Ray vk2tv


On 17/11/2013 04:02, Lee Bengston wrote:
>
> If APRX didn't pan out I would try Dixprs.  Because it is Python 
> script based it just works on a Pi without needing an arm version.  It 
> has no map GUI so it can run like APRX with no X session and therefore 
> is fairly lightweight.
>
> Regards,
> Lee - K5DAT
>
>
> - sent from my mobile phone
>
> On Nov 15, 2013 11:58 PM, "Andrew Rich" <vk4tec at tech-software.net 
> <mailto:vk4tec at tech-software.net>> wrote:
> >
> > Cause all I want is a simple raspberry pi
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20131117/3d7bb5ee/attachment.html>