[aprssig] WB2PAY westbound w/a 20 sec TX rate on WIDE1-1, WIDE2-1

Alan wa4sca at gmail.com
Sun Feb 17 15:41:32 EST 2013


He is showing a TinyTrak 3. If you look at the APRS.FI historical data, he
has been doing that for a long time.  Since 2011 at least. Could be a bad
configuration, or RF getting into it.  They are bad about that, and will
beacon constantly if that happens.  We had a similar problem locally, and
eventually had to block him at the digi level until it was fixed.



-----Original Message-----
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Kriss Kliegle
Sent: Sunday, February 17, 2013 11:10 AM
To: aprssig at tapr.org
Subject: [aprssig] WB2PAY westbound w/a 20 sec TX rate on WIDE1-1,WIDE2-1

Sitting in office and noticed the commotion on the APRS S-Meter radio.
Turned on the screen of APRSDOS and hit View and Paths... Woah! What a mess!

He's now 68 miles away and still pinging my digipeating!

I dropped him a note via email on address in QRZ, we shall see how this
turns out.

Another appliance operator?

73 de Kriss. KA1GJU

Sent from my iPad
aprssig mailing list
aprssig at tapr.org

More information about the aprssig mailing list