[aprssig] 1200 vs 9600 baud (was: Tracker3 9600 baud balloon tracker beta offer)

[Andrew Rich]

Why stop there ? 

EasyRadio mob could be partitioned to make ham gear 

19k2 - just add uP 

- Andrew- 
  ----- Original Message ----- 
  From: Hüseyin ODABAŞ, TA1DF 
  To: TAPR APRS Mailing List 
  Sent: Friday, December 20, 2013 6:08 PM
  Subject: Re: [aprssig] 1200 vs 9600 baud (was: Tracker3 9600 baud balloon tracker beta offer)


  Hi to all

  A Beagle Bone Black + AIS based 9k6 modem - low power UHF cape combo would be a good combination as new year gift :-)

  Best 73!

  Huseyin TA1DF

  20 Ara 2013 08:13 tarihinde "Scott Miller" <scott at opentrac.org> yazdı:

    I want to see more 9600 baud APRS on 70cm - we don't get a lot of consumer RF stuff down in the VHF bands and it's never going to be as cheap as the low-power UHF stuff that's churned out in massive quantities for consumer electronics.

    But it shouldn't be just a faster APRS network.  It needs to be a lot smarter - self-organizing and adaptive, not relying on centralized control but also not every man for himself ALOHA networking.

    I'm hoping to play around with that some myself, but right now I've got two more pallets of weather stations to finish packing... somehow running a full-time APRS business is leaving me less time to play with APRS.

    Scott
    N1VG

    On 12/19/2013 4:12 PM, Ted11 wrote:

      Scott's balloon tracker has gotten me thinking again about a lingering
      question, 1200 vs 9600 baud for APRS.  I think I understand this:

      1.  9600 lets you send more data per time interval.
      2.  9600 requires tighter radio integration (can't just plug into the
      microphone jack).
      3.  9600 seems to work best (only?) on UHF.

      Beyond those rather rudimentary constraints, I'm not sure how to decide to
      use 1200 or 9600.  All my APRS stuff so far is done at 1200, but I'm
      interested in what advantages 9600 might have.  So how would you answer the
      question, "When should I use 9600 baud for APRS and when should I use 1200
      baud?"

      Thanks.

      Ted
      K5KZ

      _______________________________________________
      aprssig mailing list
      aprssig at tapr.org
      http://www.tapr.org/mailman/listinfo/aprssig


    _______________________________________________
    aprssig mailing list
    aprssig at tapr.org
    http://www.tapr.org/mailman/listinfo/aprssig



------------------------------------------------------------------------------


  _______________________________________________
  aprssig mailing list
  aprssig at tapr.org
  http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20131223/e759a927/attachment.html>