[aprssig] Best format for a Repeater Item (Better!)
bruninga at usna.edu
Thu Apr 25 08:04:59 EDT 2013
> A quick scan of http://findu.com/145.* objects shows less than 20%
> compliance with just the FREQ and TONE fields.
> Apparently I'm not the only one who's ignorant.
Yes, it is very frustrating. We need people to look at how their DIGIS,
and FREQ objects show up on the front panel of the mobile radios to get
them to understand that formatting is important.
All we need is a few motivated people like yourself to check all the digis
in their area and make sure they are putting out the correct formats.
Then we could clean this up nicely.
On Apr 24, 2013, at 2:57 PM, Lynn W. Deffenbaugh (Mr)
<ldeffenb at homeside.to> wrote:
> On 4/24/2013 5:09 PM, Robert Bruninga wrote:
>> The proper format I'd suggest is:
>> )145.25sji!4833.53N/12307.05WrPHGxxx T131 R25m Net Tu 7pm mtg3rdT
>> This has all the fetures intented for this APRS functionality noted
>> Monitor the OBJECT using a D7 HT and you should see this display:
> Bob! You forgot the most important part that was recently discovered!
The Yaesu FTM-350 REQUIRES the frequency at the beginning of the comment!
And they also require it to be MHz.
> )145.25sji!4833.53N/12307.05Wr145.250MHz T131 R25m Net Tu 7pm mtg3rdT
> I tentatively replaced your PHG with the frequency but kept the 25 mile
range term because http://www.aprs.org/info/freqspec.txt doesn't show how
to do both PHG and the Yaesu required frequency.
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
> aprssig mailing list
> aprssig at tapr.org
aprssig mailing list
aprssig at tapr.org
More information about the aprssig