[aprssig] newbee with D72 and AVMAP G5

[Lynn W. Deffenbaugh (Mr)]

Probably not a bug.  Typical devices expect to have a single GPS active 
at any point in time.  If you expect it to talk to an external GPS, then 
it will expect the GPS source to come from there.  From an 
implementation point of view, it makes sense to require the external GPS 
to be enabled to get waypoints to go out there.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/1/2012 11:58 AM, Bob Bruninga wrote:
>>> No combinations of the above worked. Tried both at 4800 also. Notice I
> never
>>> tried enabling the COMPORT INPUT to GPS, since the D72 has its own GPS.
>>> Could that have been it?
>> The instructions for using the AvMap G6 with the TH-D72 say to disable
>> the internal GPS and set the D72 for external GPS. I assume you'd use
>> the same procedure with the AvMap G5.
> Does this sound like a bug then with the D72?  That it cannot use the
> internal GPS while outputting waypoints to the serial port?
>
> Bob
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>