[aprssig] Need some help with 30m igate

[Matthew Willis]

aprx v2.04

Here's the config snippet I'm using.  (The duplicate callsign/tx-ok
properties are to work around an aprx bug/feature when beaconing)

<interface>
    callsign  N2PYI-3
    tx-ok  true
    serial-device /dev/ttyS1 9600 8n1 KISS
    initstring "INT KISS\x0dRESET\x0d"
    <kiss-subif 1>
        callsign N2PYI-3
        tx-ok true
    </kiss-subif>
</interface>

so I think I'm doing what you're suggesting right?

On Fri, Aug 3, 2012 at 4:05 PM, Bill Vodall <wa7nwp at gmail.com> wrote:
> What client are you using?   APRSX?   You have to define the "kiss
> port 1" in addition to kiss port 0 - or set the default KISS port from
> the TNC mode before going to KISS - I think - it's been too long since
> I've done that .