[aprssig] APRS plotting paths

[Andrew Rich]

I suspect it could be done in Google Earth

Build up a table of source, digi and igate 

Then draw lines between them - like a mesh diagram

You would have to know where the digi, and igate where so you would have to wait to get them to beacon.

- Andrew -

  ----- Original Message ----- 
  From: Earl Needham 
  To: Andrew Rich ; TAPR APRS Mailing List 
  Sent: Sunday, April 22, 2012 9:49 AM
  Subject: Re: [aprssig] APRS plotting paths


  Winaprs used to do something like that, dependent on the path being in the packet.

  7 3
  Earl
  KD5XB

  -- 
  Sent from my Android phone with K-9 Mail. Please excuse my brevity.


  Andrew Rich <vk4tec at tech-software.net> wrote:
    Hello

    Is there an application that will draw lines from a station to the digi or IGATE that it entered into the INET by ?

    I see there are some apps where you can draw lines when you hover over the station.

    I am interested in building up a long term picture of the lines that join mobile to digi to IGATE

    For the purpose of network performance analysis

    - Andrew -
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20120422/9c85c0d9/attachment.html>