[aprssig] Kenwood's DX List

Andre v Schaijk aprs at pe1rdw.demon.nl
Sat Dec 18 10:59:46 EST 2010


Op 18-12-2010 16:38, Bob Bruninga schreef:
> Back in 1998 at DCC, I presented all about using APRS for pushing all kinds of Tiny Web Pages to the D7 and D700 radios.  In there I show the packet I came up with called a "RESOURCE" packet to take advantage of this list.  It is documented on http://aprs.org/TWP.html
>
> Note that early D7's will not decode these unless the TOCALL is something OTHER-THAN a valid APRS call.  This is frustrating because one had to change the AX25 header just to send one of these packets on APRS, and then change back for all the other packets.  I hope that got fixed in later radios.
>
> Bob, WB4APR
>
hmm, changing the TOCALL is only frustrationg for programmers who insist 
on using a human interface to send packets, if you use kiss, you already 
have to construct the whole frame so it doesn't matter if you change the 
TOCALL for one packet.

Andre PE1RDW




More information about the aprssig mailing list