[aprssig] TO-CALL for aprx software ?

[Robert Bruninga]

> I have been working on extended version 
> of my quite successful Rx-IGate software.
> 
> I am herewith taking up TO-CALL    APRXxx    
> for this software.  Any objections ?  

I use APRXxx for APRSmax, the current version of APRSdos.  But
my numbers begin around APRX60 or so...  SO you can use below
that.

Bob, WB4aPR

Donno how many people are using it, but just in my area on RF< I
see about > 
>   "The Aprx igate/digi  http://ham.zmailer.org/oh2mqk/aprx/"
> 
> 
> For the curious,  the digipeater with Tx-IGate can be
configured
> on aprx 2.x  with something like the file at URL:
>     http://repo.ham.fi/websvn/aprx/trunk/aprx.conf.in
> 
> Only version 1.x is available for general use at the moment.
> 
> One should not that it is not embeddable on surplus TNC2
clone.
> A TNC2 clone with decent SMACK rom would be usable with this,
> but it is not enough alone, however modern PC is smaller than
> either radio or TNC -- following wiki text is in local
encryption,
> but you can understand the pictures:
> 
>     http://wiki.ham.fi/OH2RDK
> 
> And following is what area it is able to serve:
> 
>   http://ham.zmailer.org/oh2mqk/aprs/oh2rdk-heard-direct.png
> 
> Distance circles are in 10 km steps, and it does include data
points
> on the Gulf of Finland, as a few boats have APRS location
beacons too.
> 
> Same system got 70cm radio on weekend, and there service area
is about
> 15-20 km in radius.  Experimenting continues...
> 
>   73 de Matti, OH2MQK
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>