[aprssig] On-Star
Dave Baxter
dave at uk-ar.co.uk
Wed May 6 09:38:22 EDT 2009
Scott...
As in the earlier links, this shows how...
http://members.cox.net/onstar/
So, did you connect a G/shock sensor to your tracker in the Honda? ;-)
Cheers.
Dave G0WBX
> -----Original Message-----
> From: Scott Miller [mailto:scott at opentrac.org]
> Sent: 06 May 2009 05:16
> To: TAPR APRS Mailing List
> Subject: Re: [aprssig] On-Star
>
> How hard is it to physically tap into the Onstar GPS? I
> wouldn't mind doing a translator if there's a demand for it.
> I just bought a vehicle tonight myself, but it's a Nissan.
> My Honda got totaled a couple of weeks ago - my tracker
> actually got a packet out a couple of seconds after I got
> hit, when I'd slowed down to 14 mph but hadn't managed to get
> out of the lane yet.
>
> If anyone has suggestions on antenna setups for a Nissan
> Pathfinder that won't interfere with putting stuff on the
> roof rack, let me know.
>
> Scott
> N1VG
>
> Dave Baxter wrote:
> > I thought I had read much of that before. A very similar
> article was
> > on the Hackaday site a year or so back.
> >
> > The biggest single issue, is that as the article here etc
> says, if you
> > switch the Onstar's GPS from MotoBinary mode to NMEA, the
> vehicle's on
> > board Onstar system error's.
> >
> > No doubt someone could "do" a single chip Atmel/Pic or whatever, to
> > take the MotoBinary data, extract what's needed for APRS, and then
> > spit out NMEA strings for our needs, leaving the on board
> OEM systems
> > happy and unconfused.
> >
> > Or, perhaps a "special version" tracker that is happy with the
> > Motorola Binary format and does the APRS thing
> indipendantly. No need
> > for a D700/D7/D710 etc then, probably take the unmodified data (no
> > need for
> > RS232 conversion) too.
> >
> > Just musing...
> >
> > 73.
> >
> > Dave G0WBX.
> >
> >> -----Original Message-----
> >> From: Kent Hufford [mailto:khufford at atlanticbb.net]
> >> Sent: 03 May 2009 13:09
> >> To: 'TAPR APRS Mailing List'
> >> Cc: W1JD at mindspring.com
> >> Subject: Re: [aprssig] On-Star
> >>
> >>
> >> http://members.cox.net/onstar/
> >>
> >> Kent
> >> KQ4KK
> >>
> >> -----Original Message-----
> >> From: aprssig-bounces at tapr.org
> >> [mailto:aprssig-bounces at tapr.org] On Behalf Of JD Delancy
> >> Sent: Sunday, May 03, 2009 8:06 AM
> >> To: aprssig at tapr.org
> >> Subject: [aprssig] On-Star
> >>
> >> Has anyone successfully interfaced the Kenwood D700 with General
> >> Motors'
> >> On-Star ?
> >>
> >> jd
> >> >
> >>
> >> _______________________________________________
> >> aprssig mailing list
> >> aprssig at tapr.org
> >> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >>
> >>
> >>
> >>
> >>
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> >
>
>
>
>
More information about the aprssig
mailing list