[aprssig] New Firmware for the D710

[Bob Bruninga]

>   Which update do we do 1st. Main Firmware then the
>   Operation Panel.

Im not sure.  I think the insructions are there on the web pages, though it took a lot of reading.  I have kept my radio current, so all I needed was the display panel update.

THough at the end they do say to do a FULL RESET so I lost all 100 memories.  But I have a 1600 mile drive, plenty of time to reload (though doing it from the PC would have been smarter, if I had a copy of the MCP program with me).

Bob, Wb4APR

>   Ben Lindner
>   VK5JFK
>
>   Bob Bruninga wrote:
>
> Kenwood apparently has released an update to the D710 version(V2.01) onto the Kenwood official download site.  It appears its main purpose is to upgrade the D710 to decode the new Yaesu VX-8R and be able to display its new SYMBOL. 
>
> The new version will also display any other new Mic-E devices such as the Byonics TT4 when it begins using the new TYPE codes and it fixes some other minor issues.
>
> www.kenwood.com/i/products/info/amateur/software_download.html
>
> I just loaded it to my control panel and am leaving in 8 hours for a 1600 mile round-trip to alabama and back this weekend.
>
> Bob, WB4APR-9
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>  
>
>      ----------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.10.8/1896 - Release Date: 1/15/2009 7:10 PM
>
>  
>________________
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig