[aprssig] SheevaPlug plug computers for igates?

[Rich Mulvey]

Have you found indications that there's a supported JVM?  I'm not seeing
anything other than that one is planned for some indeterminate time in the
future.

- Rich


On Wed, Feb 25, 2009 at 8:37 AM, Mark Cheavens <mcheavens at usa.net> wrote:

> My "plan" is to put JavaAPRS on the SheevaPlugs I ordered yesterday,
> use a TNCx with the available USB interface directly onboard, coupled
> to a good radio. (I use a lot of GE Delta's and Phoenix's)
>
> Mark
> KC5EVE
> At 03:42 AM 2/25/2009, you wrote:
>
> >    These new devices, currently priced around $100, might be interesting,
> >if someone would like to start to produce low-powered igate kits, or set
> >up small igates as custom projects. There's no audio or RS-232
> >transceivers, but there are two UARTs. 512M DDR2 SDRAM, 512M NAND FLASH,
> >1.2 GHz ARMv5 CPU, gigabit ethernet and a USB2 host. Maybe a small
> >receiver and modem would fit in the box.
> >
> >http://www.linuxdevices.com/news/NS9634061300.html
> >
> http://www.engadget.com/2009/02/24/marvells-sheevaplug-linux-pc-fits-in-its-power-adapter/
> >
> http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp
> >http://www.globalscaletechnologies.com/p-22-sheevaplug-dev-kit.aspx
> >http://www.pogoplug.com/
> >
> >    - Hessu, OH7LZB
> >
> >
> >_______________________________________________
> >aprssig mailing list
> >aprssig at tapr.org
> >https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>



-- 
rich at mulveyfamily.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20090225/5957034d/attachment.html>