[aprssig] D710 questions

[Bill Diaz]

Andrew,
    See below:

-----Original Message-----
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Andrew Rich (Home)
Sent: Saturday, August 22, 2009 16:30
To: TAPR APRS Mailing List
Subject: [aprssig] D710 questions


01. The TNC has moved into the head ?
02. The com connector on the head, is that RS232 and is it a plug I can buy
?
03. The GPS port, 4800 ? what sentences ?
04. The data port on the back - straight of disc ? so I can use those modes
that need a DISC tap from here ?
05. cct diagrams ?
06. The "PC" connector on the body, just goes to the head ?
07. Can I use the D710 as a "TNC" so I can write LINUX programs for it ?
serial
08. I am confused about the TNC moving to the head, and yet there is the
connectors still on the radio.
09. Is my only option to feed GPS into the head ?
10. I need 5 volts for my GPS GARMIN 18 - somewhere on D710 ?
 
    See
http://www.kenwood.com/i/products/info/amateur/pdf/TM-D710AE_IDM_R1.pdf for
the in depth manual.
 
Bill KC9XG
 
 
 
 
----------------------------------------------------------
Andrew Rich 
Aiways Technical Officer Grade 4
Surveillance - RADAR ADS-B
Amateur Radio Callsign VK4TEC
email: vk4tec at tech-software.net
web: www.tech-software.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20090822/31957d18/attachment.html>