[aprssig] D710 display head software emulator?

[Steve Noskowicz]

--- On Fri, 8/7/09, Fred Eckert <fredeckert at hotmail.com> wrote:

> 
> Is there a software program available that takes the place
> of the D710 display head? 

Can't comment on Ten-Tec.

On the outside chance that the 710 software was a starting point for the 700...

The 700 can be turnrd on and operated from the serial port when there is no head connected.  Yes, I know that when the head is disconnected from an operating radio it turns off, but with no head, the PS command turnes it on and it stays on.
  Then all teh CAT commands work.  I'd start with the D700 Cat commands.  If U don't have them, I consolidated both on'line versins in one Excel spreadsheet with a few refinements not contained in teh others.  e-mail me for it.
.....OOPS....  The 710 serial port is on the head, isn't it...

Ignore that man behind the curtain.

I know at least two different fellas reverse engineered the 
Icom 706 Head<->Radio protocol.

-- 73, Steve, K9DCI
  http://k9dci.home.comcast.net/