[aprssig] d710 WIDE1-1 setup?

[Cap Pennell]

For only _your_ HT  to digipeat thru, you can eliminate all aliases in the
D710, and start your HT's digipath with the D710's callsign.  This can help,
as mobile stations _routinely_ acting as fill-in digis (or more) is not
courteous on VHF.   Leaving UITrace TEMP doesn't hurt tho, as it's not
routinely used.

 

Mike, you could reduce the number of hops requested in your digipath
settings to help folks out on VHF too.  Routinely more'n enuf.

73, Cap KE6AFE

 

From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Michael J. Wolthuis
Sent: Monday, April 06, 2009 10:02 AM
To: aprssig at tapr.org
Subject: [aprssig] d710 WIDE1-1 setup?

 

Okay, finally installed my d710 and I want to use it for my d7a(g) to digi
through.  My d700 was setup as a WIDE1-1 digi.  However, on d710 there are
two places it could go.  Should I use UIDIGI WIDE1-1 or UITRACE WIDE1-1?

 

I see Uitrace is currently temp and Uidigi was off.

 

Thanks,

Mike

Kb8zgl

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20090406/b2c5fbdc/attachment.html>