[aprssig] Protocol parsing questions

[J.C. Wren]

Keith,

Up to the barometer was no problem, that's documented.  What's the junk
following, though?

--jc

On Thu, Nov 20, 2008 at 4:59 PM, Keith VE7GDH <ve7gdh at rac.ca> wrote:

> JC K4JCW wrote...
>
> > I've run across a few packets that I can't determine the contents of
> > based on the 1.0.1 and 1.1 specifications.  For example, the packet
> > below:
> >
> > CCDES-1>APRSWX,WIDE1-1,WIDE2-2,qAR,W3AHL-4:@200150z3957.34N
> >
> /07535.07W_108/000g000t029r000p000P000h48b10170L000gt41.93vw0.243bv12.78fr000.C100
>
> Here's UI-View's "help" on weather data format if it's any help... e.g.
>
> 272/000g006t069r010p030P020h61b10150
>
> 272 - wind direction - 272 degrees
> 010 - wind speed - 10 mph
> g015 - wind gust - 15 mph
> t069 - temperature - 69 degrees F
> r010 - rain in last hour in hundredths of an inch - 0.1 inches
> p030 - rain in last 24 hours in hundredths of an inch - 0.3 inches
> P020 - rain since midnight in hundredths of an inch - 0.2 inches
> h61 - humidity 61% (00 = 100%)
> b10153 - barometric pressure in tenths of a millibar - 1015.3 millibars
>
> 73 es cul - Keith VE7GDH
> --
> "I may be lost, but I know exactly where I am!"
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20081120/7f9e7b19/attachment.html>