[aprssig] GPS Power and RS232

Jason Rausch jason at ke4nyv.com
Sun Mar 16 19:35:08 EDT 2008

I have a whole bunch of boards left over from my own
version of the Deluo/Kenwood adapter I designed.  I
have been meaning to list them on the site for about
$1 each.

Even though it was meant for connecting a Deluo to a
Kenwood, it can be used otherwise since there are pads
for these connections.  The 7805 and caps are part of
the main board for the power regulation.

If you are interested, let me know and I will get it

Jason KE4NYV
RPC Electronics

--- Bill Vodall WA7NWP <wa7nwp at gmail.com> wrote:

> >  Anyone know where there might be a small power
> converter to go from 13.8
> >  volts to 5 vdc to power a GPS.  I know how to
> make one  but am really
> >  looking for something readily available at this
> time.  If not I will
> >  have to order some parts and make one.
> I find the box of old disposed Cell phone 12V
> adapters and chargers at
> the local thrift stores to be a ready source of
> cheap power adapters.
> Sometimes I leave the cig-plug intact.  On others I
> perform surgery
> and replace it with the appropriate low voltage
> connector.  Sometimes
> even power poles...   (Can I mention that word
> here?)
> Just check the output voltage rating and you'll find
> adapters from 3 to 9 V..
> 73
> Bill - WA7NWP
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org

More information about the aprssig mailing list