[aprssig] ICOM 910

[Jack Chomley]

At 08:49 AM 1/4/2008, Andrew wrote:
>Need some advice.
>
>Can I do this with the ICOM 910 ?
>
>1. Run ISS independantly on VFOA with a 1200 baud TNC. (and TX)
>2. Run GO-32 / AO-51 on the sub band (RX only) 9k6 - WITH an AG-35 
>preamp in line ?
>
> From what I am reading, the AG-35 or AG-25 for that matter, are 
> powered up the coax ??
>
>I have a KPC9612 TNC with seperate 1200 9k6 ports.
>
>That should work out nicely
>
>----------------------------------------------------------------------------
>Andrew Rich VK4TEC
><mailto:vk4tec at people.net.au>vk4tec at people.net.au
>http://www.tech-software.net
>

Andrew, I have a Hamtronics CC432-5 down converter kit 435-437MHz in 
with 28-30MHz out.

http://www.hamtronics.com/rcv_conv.htm

Along with a Down East Microwave 450LNW 70cm pre amp kit (NOT powered 
up coax) Its not a current model.

http://www.downeastmicrowave.com/

You can have them for free, IF you want them. I got all SAT Mode keen 
about 15 years ago and made a heap of stuff.....these kits are the feftovers!

73s

Jack VK4JRC


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20080104/907bb86b/attachment.html>