[aprssig] Go-32

[gerheim at cox.net]

Question.  
I found my call on the raw findu page for GO-32 a couple days ago:
http://www.findu.com/cgi-bin/raw.cgi?call=4XTECH-12

Now my call (K1QN-2) is gone.  I may have changed some settings in UIVIEW.  I'm especially concerned about Setup/Staion Setup dialog, UNPROTO ADDRESS:.  It may have been CQ, ARISS, and I wisely (?) changed it to 4XTECH, and then APRS VIA 4XTECH.  

1) Am I still getting through, even if I'm not listed on the raw findu page?
2) What's the proper setting for Unproto Address in UIVIEW?  

Thanks!  

We gotta get this bird in the game!!!!



---- "N3UJJ (Scott Gillis)" <N3UJJ at N3UJJ.COM> wrote: 
>  
> Jim,
> 
> You are not alone, I have been monitoring GO-32 for a week (from work &
> home), without luck.
> 
> 
> Scott Gillis N3UJJ 
> My Current Location <http://location.n3ujj.com> 
> My Amateur Weather Station <http://weather.n3ujj.com/> 
> 
> 
> 
> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
> On Behalf Of James Jolin
> Sent: Friday, October 19, 2007 12:33
> To: TAPR APRS Mailing List
> Subject: [aprssig] Go-32
> 
> I have been monitoring go-32 for awhile now and I get a one segment "s" 
> reading at about 11:00 cdt.  I turn on pmon on my d-700 and all I see is
> cmd: the date and the time.nothing else.  I have set the radio as per Bob's
> email and I can't understand what is wrong.
> Jim WA9ARB 44.50 87.22
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

--
-Al Gerheim, K1QN

HP-49G+ Software Page:
http://members.cox.net/above