[aprssig] W3,SSn-N digipeater text

[Cap Pennell]

For the KPC-3 v8.2 (KPC3-3F427265-8.2) as a digi, WIDE1-1 must be specified
in UIdigi, as one of the four possible aliases listed in UIdigi:
UIdigi ON WIDE1-1,TEMP1-1
MYAlias none  (not RELAY nor WIDE nor TRACE nor WIDE1-1)
UIDWait OFF

In NCA, Northern California, we use NCA for our "SS" in our full high "S
overlay" digis, and those KPC-3v8.2 (KPC3-3F427265-8.2) TNCs specify both
WIDE1-1 and NCA1-1 ("SS"1-1) using:
UIdigi ON WIDE1-1,NCA1-1,WIDE3-3,WIDE3-2

The KPC-3+v8.3 and later don't have to specifically list WIDE1-1 (nor
NCA1-1) so they can use instead:
UIdigi ON WIDE4-3,WIDE4-2,WIDE3-3,WIDE3-2

73, Cap

> > I do think that some of the digis are misconfigured
> > --- it appears that they have WIDE1-1 set as MYALIAS
>
> I think a lot (if not most) of your NM digis are KPC-3 version
> 8.2, and so they do not properly do the WIDEn-N when N gets to
> zero.  So they all have to do the last hop as WIDE1-1 to make it
> all work right.  SO yes, the KPC-3 version 8.2 digis have to
> have WIDE1-1 as a myalias...
>
> Thanks for filling me in on the background.
>
> Bob, WB4APR