[aprssig] One-Wire, Opentracker troubleshoot

['Scott Miller']

Ok.  If the LED blinks, but doesn't connect, try resetting it a few times.
If you get a communications error, then you've probably got a bad FET.  I
can send a replacement part or you can send it back for repair.  Some of the
earlier OT1x board revisions were a little ESD-sensitive.  I've since
corrected the problem, but I'm still offering free repairs for the affected
versions.

Scott
N1VG

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org 
> [mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Bob Cutter
> Sent: Tuesday, March 20, 2007 8:36 AM
> To: TAPR APRS Mailing List
> Subject: RE: [aprssig] One-Wire, Opentracker troubleshoot
> 
> Tnx Scott, I cannot get it to connect for Config. now
> so suspect the TNC.  I will try the O-W utility to
> eliminate that component.
> 
> 73, Bob KI0G
> --- 'Scott Miller' <scott at opentrac.org> wrote:
> 
> > If you've 
> 
> 
>  
> ______________________________________________________________
> ______________________
> Get your own web address.  
> Have a HUGE year through Yahoo! Small Business.
> http://smallbusiness.yahoo.com/domains/?p=BESTDEAL
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
>